Neewer TT520 Flash Speedlite for Canon Nikon Sony Panasonic Olympus Fujifilm Pentax Sigma Minolta Leica and Other SLR Digital SLR Film SLR Cameras and Digital Cameras with single-contact Hot Shoe

May 5, 2015 - Comment

Specifications: Guide Number:33 ( ISO 100 ) Flash Mode: M, S1, S2 Vertical Rotation Angle :0~90 degrees Horizontal Rotation Angle: 0~270 degrees Lighting Times: 100-1500 times ( AA alkaline batteries used ) Recycle Time :approx 0.5-5s ( AA alkaline batteries used ) Light Quantity Output Control :with 1/8 – stop increment Color Temperature: 5600K+200K Flash

Buy Now! £25.49Amazon.co.uk Price
(as of December 5, 2018 4:10 pm UTC - Details)

Specifications:

Guide Number:33 ( ISO 100 )

Flash Mode: M, S1, S2

Vertical Rotation Angle :0~90 degrees

Horizontal Rotation Angle: 0~270 degrees

Lighting Times: 100-1500 times ( AA alkaline batteries used )

Recycle Time :approx 0.5-5s ( AA alkaline batteries used )

Light Quantity Output Control :with 1/8 – stop increment

Color Temperature: 5600K+200K

Flash Duration :1/800s~1/2000s

Dimensions :190*75*55mm

Features:  

1. M Mode
Press the MODE key to M Mode. In this mode, you can set TT520 On to your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal. 

2. S1 Mode

(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. 

(2) When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger.  

3. S2 Mode
Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won’t flash synchronously with the first flash but the second flash from the master flash. 

4. Power-saving Function

(1) To save battery power, the flash will enter stand-by state in about 30 minutes of idle use. Press any button to wake it up.

(2) In S1/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use. Press any button to wake it up. 

(3) In Power-saving mode, the charging indicator flickers in every 3 seconds. Other Indicators are turned off.

Product Features

  • This tt520 is compatible with many camera with the standard hot shoe (such as Canon, Nikon, Pentax, Olympus etc.)
  • This flash has a guide number of 33 (ISO 100), a color temperature of 5600K+200K, and 4 AA batteries (Alkaline or Ni-MH are usable) power the unit.
  • One flash may last 1/800s~1/2000s depending on the 1/8 – stop increment selected. One one set of batteries, expect 100-1500 flashes (AA alkaline batteries used) and a recycle time of approx. 0.5-5s (AA alkaline batteries used).
  • The TT520 vertically rotates 0~90 degrees, and it horizontally rotates 0~270 degrees.
  • Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT520 is ready to shoot. For a test flash, press the test button. After use, press the ON/OFF to OFF to power off. If the red charging indicator lamp flickers in every 1s, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries. Power Control: The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level. Press “+” to make power higher and they are 1/128, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 1/1. Otherwise, press “-” to make power lower. Protection Function: Protection in continuous flashes:To prevent the flash head from getting too hot and damage, please do not flash over 20 times when in power lever 1/2,1/1. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down the flash unit around 10 minutes and it will turn to normal state. Systematic over-temperature protection:When the inner circuit is over-heating, which indicates over use of the flash unit, the inner circuit will shut down power automatically. The flash unit will turn to normal state after the inner circuit is cooled down.

Comments

Ivornoclue says:

Good Buy 0

busby says:

Excellent value for money 0

Tony Beaumont says:

For the money it’s a no brainer Ok so this speedlite isn’t going to break the bank, and I dare say a lot of people have looked at itand said (Mmmmmmm can’t be much good for that money) well I said the same thing, and then I thought wellat that money it’s worth a punt, I am so glad I did.It arrived very quickly and well packaged thanks to Amazon.The TT 520 is well constructed and looks to be very robust, it has a PC sinc socket and external battery pack connection,Not sure it mentions those anywhere in the product description, also comes with a carry pouchOK it’s not TTL but a lot of the pro’s hardly ever use TTL it restricts creativity.The Neewer TT520 is a great product for the price, ok it’s not Nikon or Canon and if you really must have the namethen you’ve got to pay for it to the tune…

Comments are disabled for this post.